ST400i Cordless Stapler

How many staples does the ST400i hold?

The ST400i fencing stapler holds 50 staples (2 strips of 25 staples)

Can I use other staples in this fencing stapler?

No, the staples are specifically collated to work in conjunction with the Stockade ST400i stapler. Any attempt to load non Stockade collated staples may result in damage to the stapler that will not be covered by warranty.

How long is the warranty for the ST400i fencing stapler?

The warranty for the ST400i fence stapler is 12 months.

How long does the gas fuel cells last?

500-750 staples per fuel cell between 4°C and 49°C (39°F and 120°F). You should never be concerned about running out of fuel as each box of ST400i staples contains 2 fuel cells allowing you to fire more than 1000 staples. Each pack of staples contains 1000 x 4mm /9 gauge staples.

Can I use Paslode fuel cells in this cordless fencing stapler?

No, you can only use the fuel that is supplied with the STOCKade ST400i 4mm / 9 gauge barbed staples.

Can I purchase extra fuel cells for the ST400i fencing stapler?

You shouldn’t need any more fuel cells as the two fuel cells provided with each pack of 1000 staples are capable of firing more than 1200 staples.

How many batteries are included with the ST400i?

Each kit comes with 2 batteries

How long does each battery last?

Each battery is capable of firing up to 3000 x 4mm / 9 gauge barbed staples. The two batteries combined in the kit can fire up to 6000 staples. This performance of the battery is linked to ambient temperature.

Can I charge the batteries in the car?

Yes, you can, the ST400i kit comes with a 12V cigarette charging cable that can be connected to the charging base.

Should I remove the fuel cell from the ST400i fencing stapler at the end of each day?

We recommend you leave the fuel cell in the ST400i stapler to preserve fuel and to prevent any loss of fuel that occurs every time you remove it.

Should I remove the ST400i battery at the end of the day?

You should always pull the battery out until it clicks into the first locking position or remove the battery entirely when the tool is not in use to ensure it is safe to handle. The battery will be drained if left in the tool overnight.

Should I wear safety glasses when using the ST400i fencing stapler?

Yes, we strongly recommend you wear safety glasses when using this stapler. We think it’s so important that we have included safety glasses with the ST400i stapler.

Should I wear ear protection when using the ST400i stapler?

We recommend you wear ear protection like earplugs or ear muffs whenever you use the ST400i stapler as long exposure to the loud noise every time you fire the tool can cause hearing damage.

Should the staples be left in the stapler storing it in the case?

We recommend you remove the staples from the ST400i before storing in the protective case.

Is the depth of the staples adjustable?

Yes, the depth of the staple is adjustable by using the hex key provided to loosen the screw under the head where the staples come out. Please remove the battery before making any adjustments.

Is the fuel cell reusable?

No, please dispose of the fuel cell cans responsibly after each use

I lost my manual for the ST400i fencing stapler, where can I get another one?

You can download the manuals in PDF format here. Please ensure you have the free Adobe Reader installed on you computer if you have trouble opening the file.

How do I know how much fuel is left in the ST400i fuel cell?

Simply press the button in the middle of the circle next to the belt hook and read the number of lights on the image that looks like a fuel cell. Four green lights mean that the fuel cell is full, one green light means that the fuel cell is low and almost empty. If the fuel cell has one light it may also mean that there is not enough fuel to fire the staples.

How do I know if the battery is charged enough to use?

You can press the button in the middle of the circle next to the belt hook and read the number of lights that are on just above the battery meter. Four lights on means that the battery is good to go, one light on means that the battery is low and almost empty.

What should I do if the ST400i fencing stapler is not firing?

Start by checking the battery and fuel cell meter. You can then check if you still have staples in the chamber. If the fencing stapler is still not working and the fuel cell is low, you should try replacing the fuel cell as it may be too low to fire. If the battery is low, it may also need to be replaced with a fully charged battery to operate. Ensure that the fuel cell is not out of date by checking the expiration date on the cylinder.

Are the ST400i stapler batteries rechargeable?

Yes, the ST400i batteries are rechargeable using the battery charger provided with the stapler.

How do I install the fuel cell in the ST400i fencing stapler?

After you have purchased the staples, take one fuel cell out and remove the clear cap from the top. Place the fuel cell with the blue tip down into the fuel cell holder section located on the right of the belt hook. Ensure that you push the fuel cell until it clicks into place.

What is the operating temperature of the ST400i fencing stapler?

You can use the ST400i fencing stapler in temperatures of 49 degrees to -15 degrees Celsius (5-120 degrees Fahrenheit)

What is the water rating for the ST400i wire fence stapler?

The ST400i stapler is rated as IP54. This tool is protected from limited dust ingress and from water spray from any direction.

What is the weight of the ST400i fencing stapler?

The weight of the ST400i stapler is 4.2kg / 9.24lbs.

What head attachment do I use to fire staples so the head is vertical?

The head with the V-notch would be suitable for this application.

What head attachment do I use to fire staples at an angle?

We recommend you change the head over using the 4mm Hex tool provided, the angle wire guide will allow shots on an angle every time.

What does a constant red light on the right of the battery meter mean?

The constant red light means that you will need to take the ST400i in to a service center to fix a current issue with the tool. Find your nearest service agent here: https://www.stockade.com/where-to-service/

What does a blinking red light on the right of the battery mean?

The blinking red light usually means that the battery is low.

How often do I need to do a complete service for the ST400i fencing stapler?

You should take your ST400i fencing stapler in for a complete service every 30,000 staples that you have used.

Where do I find a service agent to service my ST400i cordless fencing stapler?

Please use the Where to Service section to find your closest service agent.

ST400 Pneumatic Stapler

How many staples does the ST400 fencing stapler hold?

The ST400 fencing stapler holds 50 staples (2 strips of staples)

Can I use other staples in this fencing stapler?

No, the staples are specifically collated to work in conjunction with the Stockade ST400 pneumatic fencing stapler. Any attempt to load non Stockade collated staples may result in damage to the stapler that will not be covered by warranty.

How long is the warranty for the ST400 fencing stapler?

The warranty for the ST400 fence stapler is 12 months.

What is the best operating pressure to use with the ST400 stapler?

We recommend setting the pressure on your compressor to 6.75 to 7.24bar (98 to 105psi).

What is the recommended hose diameter to use with the ST400 fencing stapler?

We recommend using a 10mm (3/8 to 1/2 inch) hose diameter with your ST400 fencing stapler.

What kind of staples is the ST400 pneumatic stapler suited for?

This fencing stapler is suited for 4mm / 9 gauge staples. The staple lengths come in 40mm / 1 1/2″, 45mm / 1 3/4″ and 50mm / 2″.

Does this fencing stapler work well with hardwood?

No, usually we recommend the ST315 fencing stapler as it works better with the 33mm / 1 1/4″ Staples.

Should I wear safety glasses when using the ST400 pneumatic fencing stapler?

Yes, we strongly recommend you wear safety glasses when using this stapler. We think it’s so important that we have included safety glasses with the ST400 pneumatic fencing stapler.

Should the staples be left in the stapler when storing the ST400 stapler in the case?

We recommend you remove the staples from the ST400 pneumatic stapler before storing it in the protective case.

Should I wear ear protection when using the ST400 fencing stapler?

We recommend you wear ear protection like earplugs or earmuffs whenever you use the ST400 fencing stapler as long exposure to the loud noise every time you fire the tool can cause hearing damage.

Is the depth of the staples adjustable?

Yes, the depth of the staple in the ST400 fencing stapler is adjustable by using the hex key provided to loosen the screw under the head where the staples come out. Please remove the battery before making any adjustments.

I lost my manual for the ST400 fencing stapler, where can I get another one?

You can download the manual in PDF format here. Please ensure you have the free Adobe Reader installed on your computer if you have trouble opening the file.

What should I do if the ST400 fencing stapler is not firing?

Check if you have any staples remaining in the magazine chamber. You can then check if you have the correct air pressure in the line.

What is the weight of the ST400 fencing stapler?

The weight of the ST400 batten fencing stapler is 3.7kg / 8.14lbs

What head attachment do I use to fire staples so the head is vertical?

The head with the V-notch would be suitable for this application.

What head attachment do I use to fire staples at an angle?

We recommend you change the head over using the 4mm Hex tool provided, the angle wire guide will allow shots on an angle every time.

How often do I need to do a complete service for the ST400 fencing stapler?

You should take your ST400 fencing stapler in for a complete service every 30,000 staples fired.

Where do I find a service agent to service my ST400 pneumatic fencing stapler?

Please use the Where to Service section to find your closest service agent.

ST315i Cordless Stapler

How many staples does the ST315i batten fencing stapler hold?

The ST315i fencing stapler holds 80 staples (3 strips of staples)

Can I use other staples in this fencing stapler?

No, the staples are specifically collated to work in conjunction with the Stockade ST315i stapler. Any attempt to load non Stockade collated staples may result in damage to the stapler that will not be covered by warranty.

How long is the warranty for the ST315i fencing stapler?

The warranty for the ST315i fence stapler is 12 months.

How long does the gas fuel cells last?

Each gas fuel can drive up to 1000 staples. Each box of ST315i staples contains 2 fuel cells allowing you to fire all the staples in the pack or up to 2000 staples. Each pack of staples contains 3.15mm / 10 1/2 gauge staples.

Can I use Paslode fuel cells in this cordless fencing stapler?

Yes, the Paslode framing fuel cells are compatible

Can I purchase extra fuel cells for the ST315i batten fencing stapler?

You shouldn’t need any more fuel cells, as the two fuel cells provided with each pack and are capable of firing all the staples in the pack. You will be able to purchase additional fuel cells if required.

How many batteries are included with the ST315i batten fencing stapler?

The ST315i batten fencing stapler now comes with 2 batteries.

How long does the battery last?

Each battery is capable of firing up to 3000 3.15mm / 10 1/2 gauge barbed staples. The two batteries combined in the kit can fire up to 6000 staples.

Can I charge the batteries in the car?

Yes, you can, the ST315i kit comes with a 12V cigarette charging cable that can be connected to the charging base.

Should I remove the gas fuel cell from the ST315i fencing stapler at the end of each day?

We recommend you leave the fuel cell in the ST315i stapler to preserve fuel and to prevent any loss of fuel that occurs every time you remove it.

Should I remove the battery from the ST315i batten fencing stapler at the end of the day?

You should always pull the battery out of the ST315i batten fencing stapler until it clicks into the first locking position or remove the battery entirely when the tool is not in use to ensure it is safe to handle. The battery will be drained if left in the tool overnight.

Should I wear safety glasses when using the ST315i fencing stapler?

Yes, we strongly recommend you wear safety glasses when using this stapler. We think it’s so important that we have included safety glasses with the ST315i batten fencing stapler.

Should I wear ear protection when using the ST315i batten fencing stapler?

We recommend you wear ear protection like earplugs or earmuffs whenever you use the ST315i batten fencing stapler as long exposure to the loud noise every time you fire the tool can cause hearing damage.

Should the staples be left in the stapler when storing it in the case?

We recommend you remove the staples from the ST315i before storing it in the protective case.

Is the depth of the staples adjustable?

Yes, the depth of the staple in the ST315i batten fencing stapler is adjustable by using the hex key provided to loosen the screw under the head where the staples come out. Please remove the battery before making any adjustments.

Is the fuel cell reusable?

No, please discard the fuel cell from the ST315i fencing stapler after each use and dispose of it responsibly.

I lost my manual for the ST315i, where can I get another one?

You can download the manuals in PDF format here. Please ensure you have the free Adobe Reader installed on your computer if you have trouble opening the file.

How do I know if the battery is charged enough to use?

You will see a green light on the side of the ST315i batten fencing stapler, this means that the battery is charged enough to use the stapler.

What should I do if the ST315i fencing stapler is not firing?

Check if you have any staples remaining in the chamber. You can then try replacing the battery with a fully charged battery. If this still does not work, we recommend replacing the gas fuel cell as this may be too low to fire the staples in the ST315i batten fencing stapler. Ensure that the fuel cell is not out of date by checking the expiration date on the cylinder.

Are the ST315i stapler batteries rechargeable?

Yes, the ST315i fencing stapler batteries are rechargeable using the battery charger provided with the stapler.

What is the weight of the ST315i batten fencing stapler?

The weight of the ST315i batten fencing stapler is 3.8kg / 8.37lbs.

What head attachment do I use to fire staples so the head is vertical?

The head with the V-notch would be suitable for this application.

What head attachment do I use to fire staples at an angle?

We recommend you change the head over using the Hex tool provided, the angle wire guide will allow shots on an angle every time.

What does a blinking red light on the right of the stapler mean?

The blinking red light usually means that the battery is low.

How often do I need to do a complete service for the ST315i batten fencing stapler?

You should take your ST315i batten fencing stapler in for a complete service every 30,000 staples used.

Where do I find a service agent to service my ST315i cordless fencing stapler?

Please use the Where to Service section to find your closest service agent.

ST315 Pneumatic Stapler

How many staples does the ST315 batten fencing stapler hold?

The ST315 batten fencing stapler holds 80 staples (3 strips of staples)

Can I use other staples in this fencing stapler?

No, the staples are specifically collated to work in conjunction with the Stockade ST315 stapler. Any attempt to load non Stockade collated staples may result in damage to the stapler that will not be covered by warranty.

How long is the warranty for the ST315 fencing stapler?

The warranty for the ST315 batten fence stapler is 12 months.

What is the best operating pressure to use with this tool?

We recommend setting the pressure on your compressor to 6.75 to 7.24bar (98 to 105psi).

What is the recommended hose diameter to use with the ST315 batten fencing stapler?

We recommend using a 6mm or 10mm hose diameter with your ST315 batten fencing stapler.

What kind of staples is the ST315 pneumatic stapler suited for?

This fencing stapler is suited for 3.15mm / 10 1/2 gauge staples. The staple lengths come in 33mm / 1 1/4″ and 40mm / 1 1/2″.

Does this fencing stapler work well with hardwood?

Yes, the ST315 fencing stapler works great when used with the 33mm / 1 1/4″ Staples.

Should I wear safety glasses when using the ST315 pneumatic batten fencing stapler?

Yes, we strongly recommend you wear safety glasses when using this stapler. We think it’s so important that we have included safety glasses with the ST315 pneumatic batten fencing stapler.

Should I wear ear protection when using the ST315 batten fencing stapler?

We recommend you wear ear protection like earplugs or earmuffs whenever you use the ST315 batten fencing stapler as long exposure to the loud noise every time you fire the tool can cause hearing damage.

Should the staples be left in the stapler when storing it in the case?

We recommend you remove the staples from the ST315 pneumatic batten stapler before storing it in the protective case.

Is the depth of the staples adjustable?

Yes, the depth of the staple in the ST315 batten fencing stapler is adjustable by using the hex key provided to loosen the screw under the head where the staples come out. Please remove the battery before making any adjustments.

I lost my manual for the ST315 batten stapler, where can I get another one?

You can download the manuals in PDF format here. Please ensure you have the free Adobe Reader installed on your computer if you have trouble opening the file.

What should I do if the ST315 fencing stapler is not firing?

Check if you have any staples remaining in the chamber. You can then check if you have the correct air pressure in the line.

What is the weight of the ST315 batten fencing stapler?

The weight of the ST315 batten fencing stapler is 2.9kg / 6.39lbs.

What head attachment do I use to fire staples so the head is vertical?

The head with the V-notch would be suitable for this application.

What head attachment do I use to fire staples at an angle?

We recommend you change the head over using the Hex tool provided, the angle wire guide will allow shots on an angle every time.

How often do I need to do a complete service for the ST315 batten fencing stapler?

You should take your ST315 batten fencing stapler in for a complete service every 30,000 staples used.

Where do I find a service agent to service my ST315 pneumatic fencing stapler?

Please use the Where to Service section to find your closest service agent.

Fence Post Staples

Are the fencing staples barbed staples?

Yes, our fence post staples are barbed.

What are the lengths of fencing staples available?

The lengths of the fencing staples available are 40mm/ 1 1/2″ Barbed Staples, 45mm/ 1 3/4″ Barbed Staples, 50mm/ 2″ Barbed Staples.

What type of coating is used on these fencing staples?

We use a zinc aluminium alloy coating, which provides superior corrosion resistance.

Can I buy additional fuel cells for the ST400i fencing staples?

No, all the fuel cells required are included in each pack of ST400i fencing staples. Each pack contains two fuel cells which are enough for the entire box.

What should I do if my staples don’t go all the way in when using hardwood?

We recommend using 40mm / 1 1/2″ Barbed Staples. If this still does not work, you may need to use the ST315 or ST315i fencing stapler along with the 33mm / 1 1/4″ Staples.

How many staples can I fit inside my stapler?

You can add 2 strips of staples which gives you about 50 staples.

What are the benefits of having a divergent point in the fencing staples?

The benefits of having a divergent point in the staples mean that the staple legs move in separate directions as they go into the timber posts for improved holding power.

How should I store the fencing staples?

We recommend you store the fencing staples in a waterproof container to keep the staples dry. The staples are paper collated and getting them wet for extended periods may affect the performance of your fencing stapler.

What is the weight of the fencing staples?

The weight varies depending on the pack of staples available.

Where can I buy the fence post staples?

We recommend you use our Where to Buy section located at the top of the website as well as the link on every product page to find your closest dealer or distributor. You can usually buy the staples from the same store where you bought your Stockade fencing stapler.

Fence Batten Staples

Are the batten fencing staples barbed staples?

Yes, our batten staples are available in barbed or plain versions.

What are the lengths of fencing staples available?

The lengths of the fencing staples available are 33mm / 1 1/4″ Plain and Barbed Staples and 40mm / 1 1/2″ Plain and Barbed Staples.

What type of coating is used on these fencing staples?

We use a zinc aluminium alloy coating, which has proven to work very well against rusting.

Can I buy additional fuel cells for the ST315i fencing staples?

No, all the fuel cells required are included in each pack of ST315i fencing staples. Each pack contains two fuel cells which are enough for the entire box.

Are these staples great for using on hardwood?

Yes, we recommend using the 33mm/ 1 1/4″ batten fencing staples.

How many staples can I fit inside my stapler?

You can add 3 strips of staples which gives you about 80 staples to use at any one time, before needing to reload the fencing stapler with more staples.

What are the benefits of having a divergent point in the fencing staples?

The benefits of having a divergent point in the staples mean that the staple legs move in separate directions as they go into the timber posts for improved holding power.

How should I store the fencing staples?

We recommend you store your batten fencing staples in a waterproof container to keep the staples dry. The batten fencing staples are paper collated and getting them wet for extended periods may affect the performance of your batten fencing stapler.

What is the weight of the fencing staples?

The weight varies depending on the pack of staples available.

Where can I buy the batten fence staples?

We recommend you use our Where to Buy section located at the top of the website as well as the link on every product page to find your closest dealer or distributor. You can usually buy the staples from the same store where you bought your Stockade fencing stapler.

What should I do if I have any other questions?

Please contact us and we can help you answer any other questions.

Stockade Compressor (Discontinued)

What fencing staplers is this Stockade compressor designed for?

This compressor is designed for our pneumatic fencing staplers like the ST315 and ST400 fencing stapler. You can also use it for other pneumatic tools or use it to inflate the tyres on your vehicle or buggy.

What is the warranty for this compressor?

There is a 12 month warranty on this compressor.

How much does the compressor weigh?

The compressor weighs in at 37kg.

What is the size of the fuel tank?

There is a 2 Litre or 0.53 gallon fuel tank.

What are the dimensions for this compressor?

227/8″ x 19¼” x 20″ (580 x 490 x 490mm)

What is the maximum operating pressure?

The maximum operating pressure is 155psi (10.7 bar)

What is the best operating pressure to use with the Stockade fencing staplers?

The best operating pressure to use with our fencing staplers is 90-120psi regulated air (6.2-8.3 bar)

What is the recommended air hose diameter to use with this compressor?

We recommend you use a 3 /8″ (10mm) hose diameter.

Where can I purchase the Stockade compressor?

The Stockade compressor has now been discontinued and no longer available to purchase.

What is the product code for this item?

The product code is C10066.

Where do I find a service agent to service my Stockade air compressor?

Please use the Where to Service section to find your closest service agent.

Insulator Guide Attachment

Does the insulator guide attachment work with the ST400i cordless fencing stapler?

Yes, it is compatible with the ST400i cordless fencing stapler.

Does the insulator guide attachment work with the ST400 Pneumatic fencing stapler?

Yes, it is compatible with the ST400 pneumatic fencing stapler.

Is it hard to connect this connector to my fencing stapler?

No, it is very easy to connect. It is the same as changing the contact work element or the tip of the stapler. Simply use the hex tool provided to remove the existing work contact element and replace with this one

What insulators will work with this attachment?

This attachment is only compatible with PEL wood post claw insulators.

Does it have an adjustable depth setting?

Yes, the depth can be changed in the same way as the contact work element. Simply loosen the screw with the hex key and move back or forward depending on your requirement.

Will this insulator be compatible with the ST315 batten fencing stapler?

No, it is not compatible with this stapler.

Will this insulator be compatible with the ST315i batten fencing stapler?

No, it is not compatible with this stapler.

Is this the best solution for building electric fences?

Yes, we think this will save you time when building your electric fence.

Where can I buy the insulator guide attachment?

Please click the where to buy button and enquire with your local dealer or distributor. You can also contact us and we will be happy to help you find your closest dealer.

What are the benefits of using the insulator guide attachment with my fencing stapler?

It prevents damage to the wire and the claw insulator, it is fast and efficient compared to traditional methods of using a hammer, and gives you a 360 degree rotation around the claw insulator to drive the staple.

What is the product code for this item?

The product code is STK4IIGT.

What should I do if I have any other questions?

Please contact us and we can help you answer any other questions.